by ShowOffs Body
\ˈhī-brəd\: the offspring of two
or more varieties produced through human manipulation to achieve specific
\ˈprō er\: the combination of
airbrush tattoo ink and airbrush makeup to achieve the specific characteristics
of durability and water resistance while maintaining the ability of easy
ProAiir™ Hybrid Makeup - Unlike other
hybrid makeup, ProAiir™ contains no water and blends together a
complete set of water ressistant makeup ingredients. With ProAiir™,
ShowOffs sets the standard for hybrid makeup today and tomorrow with the most
durable, longest lasting, non staining, most water ressistant makeup formula on
the market. The absence of water in our
formula also means you'll experience little or no separation of pigments from
fluids, longer shelf life, leaving you time to service more and more customers
instead of wasting time stirring or shaking bottles. By following the simple application
instructions, ProAiir™ will
outperform and outlast all hybrid products for application and durability. Not only will your designs look better and
last longer, you will have happy customers from the time the design is complete
until they are ready to remove it. Ease
of application, durability and simple removal.
What more could an artist ask for in a hybrid makeup?
ProAiir is the airbrush version
of Cosmetic Liquid Eye Makeup if customers ask.
(plus it comes in many colors)
What makes ProAiir™ Hybrid different from all the others?
OUR VIDEO: Click HERE
on smooth and provides unbeatable durability.
Applied correctly, designs can last up to 3 days.
life open bottles 3-5 years. Unopened
bottles shelf life 10 years.
selection of vibrant colors including Fluorescent.
coverage for all fantasy makeup artist's needs.
instantly allowing rapid layering without worry of stencils lifting colors.
· Water ressistant enabling application in hot or rainy conditions without
smearing or running.
proof formula sets instantly and won't rub off or damage clothing.
for ultimate flowability without separation of pigments.
no mist or fog created when using in closed areas (no more nose hairs filled
Fluorescent colors will not need a white base
to POP color. Pigment is great under
black light too
formula never requires diluting. Screw
on adaptor caps right on bottles and go!
for any application on prosthetics: sprays directly on foam masks and other
formula safe for use on sensitive skin.
alcohol content identical to that in liquid eye liners)
sanitary, doesn't collect mold like water base products can.
fragrance is usually pleasant to the senses.
identification / differentiation of ProAiir
Hybrid vs. Ink. (Different color labels
and bottle tops)
compliant and made in USA!
and comes in larger quantity size bottles too!
Directions for use:
air pressure between 10-15 PSI (may vary by compressor - keep it comfortable).
makeup bottle VERY WELL! Then secure to
airbrush with adaptor caps.
with adequate ventilation, keeping away from flames.
when applied to clean, oil-free skin.
Wipe skin with wipes, never apply makeup foundation or sun screen to skin before
applying ProAiir. That creates a barrier
over the clean skin. Applying to SKIN is
hold stencil against skin, if applicable.
customer to close eyes when spraying and hold breath when spraying around
between 2-4 inches from skin for best color and control. LESS IS BEST!
in light coats, layering for deeper effect.
Layer multiple colors for interesting looks.
off overspray with rubbing alcohol on Qtip.
that ProAiir™ is water ressistant! Water alone will NOT do the trick.
off with oil (e.g. baby oil), makeup remover or lather with liquid soap first,
then rinse with water.
- lather liquid soap first to breakdown
the makeup (no
water at first). Then rinse in shower.
from fabric (e.g. clothing):
NOT use water. Apply alcohol or
alcohol-based hair spray and dab to remove.
alcohol 91% + proof is fine but for extensive cleaning - Denatured Alcohol is
recommended. Seek out the biodegradable green formula found at Home Depot or
Lowes paint dept. (Denatured is also
used to clean windows).
Denatured or Alcohol through airbrush (front spray and back flush).
airbrush needle slightly, tighten in place then place airbrush tip down into storage
jar containing roughly one inch of Rubbing Alcohol. (just enough to submerge the airbrush siphon)
job storing airbrushes in Alcohol (some have tried Windex) will prevent makeup from
inside the airbrushes long enough till you get home. Clean them then.
stencils require cleaning to restore appearance, store in zip-locking bag or shallow
bowl containing 91% Alcohol for 30-60
minutes. Rinse and dry upon removing.
ProAiir it's so thin you will find little makeup layers on stencils, some
people don't even clean them!
NOT over oil your airbrush-
oil your airbrushes after 20 uses or when needed. This will cause spattering of
use airbrush OIL not household oil-that will be bad news! If you do here are some tips:
compressor at high pressure 45+ (blast them clean) and use mister and spray
airbrush cleaner or Denatured Alcohol thru siphon. Remove needle and spray from needle area of airbrush,
wipe needle and repeat a few times.
Remember to return pressure to 15.
A few good back flushes would be great!
NOT mix ProAiir™ with water or any
other products. ProAiir™ Hybrid colors CAN be mixed with other ProAiir™ Hybrid colors to create new blended colors.
colors separate a little and require shaking or stirring.
separation occur, shake, stir or quickly back flush the airbrush (cover the
adaptor cap air hole and back flush spray briefly to mix pigments). Look up videos
on airbrush back flush - don't try if not familiar with it.
generally have shorter staying power than other formulas.
using white, apply first to skin - sometimes does not cover opaque over red
not apply to open wounds or soars.
bottle well, pigment can be richer and harder to remove from skin.
a marble or stainless steel nut can be added to help with mixing liquids in
We do not reccommend glass bottles, plastic is preferred. Glass breaks and attracts heat causing
evaporation of product or thickening.